Tuesday, May 1, 2012

Lord of the Landing V1.7


Lord of the Landing V1.7 : Landing Training Environment for FSX.



A SimConnect application to help repeated landing training in various weather conditions,
and analyze and evaluate your landing data.


----- INSTALLATION -----------------------------------------

No installation or setup process is required. Just unzip and run "LoLa16.exe".
Runway data file("r4.csv") should be in same folder.


----- HOW TO USE -------------------------------------------

Run "LoLa16.exe" before or after running FSX. LoLa will connect to FSX automatically.
Main window consists of 3 areas : Position Set, Weather Set, Landing Report.

1. Position Set

You can move instantly to final approach course of ANY runway of ANY airport in the world.
Just enter ICAO code of the airport(e.g. RKSI, KLAX, EDDF), and select runway,
and select position (4NM, 8NM, 12NM straight, 12NM left, 12NM right),
and press SET! button.

Lord of the Landing Checklist will be displayed.
Pause FSX and press Ctrl + Shift + A to move to selected position.

Only aircraft position and airspeed is changed,
all other aircraft configurations(fuel, W&B, trim, power, flap, gear, ...) are kept same.

 * Tip : If crash occurs when set position on ground,
          use slew mode to go up and set position. (Y → F4 → Y → P → Ctrl + Shift + A)

2. Weather Set

You can change weather condition by setting METAR.
Press Load button to load preset file(*.metar).
Some example preset files(e.g. CAVOK, Windy, Rainy, Turbulence, Low Visibility) are included.
Change metar as you want and press Set button to set weather.

3. Landing Report

Make a landing and decelerate to the half of your landing airspeed,
then landing report will be displayed on both LoLa window and FSX screen(scrolling text).

Reported items and criteria are as below :
- Vertical Speed (ft/min) : 0~100 Perfect!, 100~200 Great, 200~350 Okay, >350 FAIL
- Flare Distance (ft) : 900~2000 Perfect!, 700~2600 Great, 500~3200 Okay, <500 or >3200 FAIL
- Centerline Deviation : 0~4 Perfect, 4~8 Great, 8~12 Okay, >12 FAIL
- Pitch (deg) : 2~6 Perfect!, 1~7 Great, 0.5~8 Okay, <0.5 or >8 FAIL
- Bank (deg) : ~1 Perfect!, 1~3 Great, 3~6 Okay, >6 FAIL
- Sideslip Angle (deg) : ~2 Perfect!, 2~5 Great, 5~10 Okay, >10 FAIL
- Max V/S (ft/min) : <1000 Pass(Stabilized Approach), >1000 FAIL

Press save button to save landing report to file.

 * Flare Distance means distance from RA 50ft to touchdown.
   Typically RA is 30~40ft when crossing the runway threshold,
   so distance from runway threshold to touchdown point is 200~300ft less than displayed flare distance.

 * Centerline Deviation is only reported when ILS(Localizer) is active.

 * If bounced during landing, Flare Distance is calculated on the last touchdown,
   but all other data are on the first touchdown.


----- ACKNOWLEDGEMENTS -------------------------------------

Korean Air    - for giving me chance of flying on real flight simulator
CAE Inc.      - for real flight simulator which inspired me to make LoLa
Peter Dowson  - for great MakeRwys utility
Thank you!


Enjoy and happy training!

Dongjin Shin

FsRaas V1.1


FsRaas (Runway Awareness and Advisory System for FSX/FS2004) V1.1

The Runway Awareness and Advisory System (RAAS) is an electronic detection system developed by Honeywell.
It provides flight crew members with information concerning the aircraft's position relative to an airport's runway during taxi, takeoff, final approach, landing and rollout to improve situational awareness and reduce the likelihood of a runway incursion.

FsRaas V1.1 includes following functions :
Approaching Runway(On Ground), On Runway, Takeoff Flaps,
Distance Remaining(Rejected Takeoff), Taxiway Takeoff,
Approaching Runway(Landing), Taxiway Landing,
Distance Remaining(Landing & Rollout), Runway End(<100 feet),
Deep Landing, Distance Remaining(Long Landing)

To watch FsRaas demo, please visit "http://www.youtube.com/watch?v=dUH7gAj24MY".
To learn more about Honeywell RAAS, please visit "https://honeywellrunwaysafety.com/demos.php".


----- INSTALLATION -----------------------------------------

No installation or setup process is required. Just unzip and run "FsRaas11.exe".
Runway position data file("r4.csv") should be in same folder.
FSUIPC should be installed.


----- HOW TO USE -------------------------------------------

Run "FsRaas11.exe" before or after running Flight Simulator.
It automatically connects with FS and make sounds when needed.


----- TO USE WITH ADD-ON SCENERY ---------------------------

To use at airport where add-on scenery is installed,
- Download "MakeRwys" utility at Peter Dowson's homepage (http://www.schiratti.com/dowson.html).
- Put it at FS root folder and run.
- "r4.csv" will be generated. Copy "r4.csv" to FsRaas folder(overwrite the old).

 * To improve performance, it is recommended to remove too short runways
   by opening "r4.csv" with Excel, sorting by runway length(column G),
   and deleting short runways(e.g. <5000ft).


----- OTHERS -----------------------------------------------

Sounds are recorded from "https://honeywellrunwaysafety.com/demos.php" and "http://imtranslator.net/translate-and-speak".
If there is a copyright problem, please let me know.


----- ACKNOWLEDGEMENTS -------------------------------------

Honeywell - SmartRunway & SmartLanding system
Peter Dowson - FSUIPC & MakeRwys
http://imtranslator.net/translate-and-speak
Thank you!


Enjoy and happy flight!

Dongjin Shin
May 2012